An updated genome‐scale reconstruction of the metabolic network in Escherichia coli K‐12 MG1655 is presented. This updated metabolic reconstruction includes: (1) an alignment with the latest genome annotation and the metabolic content of EcoCyc leading to the inclusion of the activities of 1260 ORFs, (2) characterization and quantification of the biomass components and maintenance requirements associated with growth of E. coli and (3) thermodynamic information for the included chemical reactions. The conversion of this metabolic network reconstruction into an in silico model is detailed. A new step in the metabolic reconstruction process, termed thermodynamic consistency analysis, is introduced, in which reactions were checked for consistency with thermodynamic reversibility estimates. Applications demonstrating the capabilities of the genome‐scale metabolic model to predict high‐throughput experimental growth and gene deletion phenotypic screens are presented. The increased scope and computational capability using this new reconstruction is expected to broaden the spectrum of both basic biology and applied systems biology studies of E. coli metabolism.
Genome sequencing and annotation, along with biochemical characterization of cellular machinery, has enabled reconstruction of cellular processes on the genomic scale since the turn of the millennium. Initial targets for reconstruction were primarily microorganisms, but with advancements in genomic sequencing technology and annotation techniques, reconstructions of higher‐order species are appearing (Reed et al, 2006a). Of the available genome‐scale reconstructions, those for metabolism are most prevalent due to the large body of work characterizing and cataloging metabolic processes. Similarly, the metabolic reconstruction of the bacterium E. coli is arguably the most advanced because it possesses the most complete body of data available for its metabolism and growth behavior. Building on the rich history of E. coli metabolic reconstruction (Figure 1), we generated an updated genome‐scale metabolic reconstruction for E. coli containing 1260 ORFs from the latest genome annotation (Riley et al, 2006). We characterize the iAF1260 reconstruction, detail its conversion to a computational model and demonstrate its application as a model to predict selected cellular phenotypes.
Figure 1 characterizes the content of iAF1260 by categorizing the ORFs (i.e., genes), reactions and metabolites contained in the reconstruction in terms of their Clusters of Orthologous Groups (COGs) functional class. The figure also outlines the genetic content of five previous reconstructions of E. coli metabolism. The major areas of expansion for iAF1260 relative to previous work (i.e., the enhancements) fall into five categories: (i) an increased scope, (ii) compartmentalization of the reconstruction into three distinct cellular compartments (the cytosol, periplasm and extra‐cellular space), (iii) increased pathway detail, (iv) incorporation of reaction thermodynamic information, and (v) alignment with the E. coli specific database, EcoCyc. Each of these five major areas of expansion is discussed further in the text.
In an effort to clearly demonstrate how a genome‐scale reconstruction can be utilized as a computational model for phenotypic predictions (e.g., flux balance analysis (FBA) calculations), we delineated the steps necessary for converting a reconstruction to a computational model (2, Figure 3). In summary, this process involves: (i) explicit assignment of the metabolites participating in a reaction (often times incorporated into the reconstruction process), (ii) definition of a system boundary, (iii) conversion of the defined system into a mathematical format that forms the basis for a computational model, (iv) curation of the network, which often requires filling gaps in the reconstruction, and (v) determining the strain specific parameters for a particular organism or system (e.g., maintenance parameters).
After formulating a computational model based on the iAF1260 reconstruction, we utilized this model to predict and quantify the active pathways and probable system outputs under glucose aerobic conditions, a common E. coli laboratory growth condition. In this process, we addressed modeling issues specific to E. coli and the chosen growth conditions that are required for accurate phenotypic predictions using iAF1260, which include (i) transcriptional regulatory events, (ii) cellular maintenance costs, and (iii) reaction kinetic effects. We then used the information from this process and applied it to study growth under a different condition, aerobic growth on succinate. The modeling predictions made using iAF1260 agreed well with reported experimental values under these conditions (Figure 3). Looking further at modeling predictions on a pathway by pathway and reaction by reaction basis, we compared results from growth on glucose to 13C‐labeled experiments (Fischer et al, 2004) and found a good agreement between predicted and observed values. A sensitivity analysis was also performed to determine how changes in key model parameters affect the computational results generated using FBA in conjunction with the iAF1260 model.
In forming iAF1260, we incorporated thermodynamic information to provide another means of assessing reaction reversibility beyond what is stated in the primary literature and assignments made using general heuristic rules. This process, termed thermodynamic consistency analysis, utilized flux variability analysis (Mahadevan and Schilling, 2003) under 174 different carbon source conditions to identify reactions that operated in a thermodynamically infeasible direction during near optimal growth. Specific examples are presented that describe how thermodynamically inconsistent reactions were altered for inclusion in iAF1260. Additionally, this analysis facilitated the further classification of reactions as essential, substitutable or blocked. Interestingly, a large number of the reactions in the reconstruction behaved uniformly regardless of the carbon source being utilized. Once reactions that operated in thermodynamically infeasible directions according to the flux variability analysis were identified and adjusted to remove all thermodynamic inconsistencies, we examined calculated ΔrG’ values and further adjusted reactions to be consistent with those we predicted to be irreversible with high likelihood.
To demonstrate how iAF1260 can be used as context for biological content, we analyzed two high‐throughput data types: growth phenotype (http://www.biolog.com) and gene essentiality (Figure 5) (Baba et al, 2006; Joyce et al, 2006) data for E. coli. To do this, we utilized FBA to screen carbon, nitrogen, phosphorus and sulfur sources that could support simulated growth, and also computationally determined the essential ORFs for growth under glucose aerobic conditions. We compared our predictions to the high‐throughput data sets and outlined the level or agreement between computational and experimental results. Whereas the agreements validate the content of the reconstruction and modeling methods (an overall agreement of 76% for growth phenotype and 92% for gene essentiality predictions), the disagreements provide area for further investigation (included in the Supplementary Data). For the growth phenotypes, disagreements indicate possible areas where there are either errors in the reconstruction, where regulation limits the utilization of pathways needed for growth, and/or point to areas where further biochemical characterization is needed (targeted areas for biological discovery). Disagreements in gene essentiality data point to specific areas where additional intracellular and transport reactions can be examined to rectify the disagreements or identify a current limitation of the reconstruction and modeling methods (e.g., transcription and translation processes are not currently incorporated in the modeling scheme).
Finally, future directions for improvement of the metabolic reconstruction of E. coli are discussed, and as the field of systems biology expands, it is expected that iAF1260 will serve as a key component for the study of E. coli and related organisms by providing a comprehensive picture of cellular metabolism.
We generated a genome‐scale reconstruction of the model organism E. coli K‐12 MG1655 which includes 1260 ORFs from the latest genome annotation and thermodynamic information for reactions and compounds included in the reconstruction. In the reconstruction process, we synchronized the contents of this reconstruction with the EcoCyc/MetaCyc databases to include the most up to date information available for E. coli metabolism.
We characterized the reconstruction content with respect to previous reconstructions of E. coli metabolism and detail five major enhancements over the previous version: increased scope, compartmentalization, increased pathway detail, incorporation of reaction thermodynamics and alignment with the EcoCyc database.
We delineated the steps necessary to utilize a reconstruction as a predictive model for constraint‐based analyses and verified that the included content was able to predict observable outcomes when compared to growth experiments.
To determine and quantify the computational model's ability to predict cellular phenotypes, we examined the influence of specific parameters on flux balancing solutions and compared computational predictions with available high‐throughput experimental data. Modeling predictions agreed well with both high‐throughput growth and gene‐essentiality data and disagreements provide specific areas for biological discovery and model refinement/expansion.
The process of extracting biochemical content from genome annotations and literature sources to computationally catalog and interconnect the metabolic pathways available to the cell (i.e., metabolic reconstruction) is well established and has been carried out for a growing number of organisms on the genome scale (Reed et al, 2006a). This network reconstruction process ultimately results in the generation of a biochemically, genomically and genetically (BiGG) structured database that can be further utilized for both mathematical computation and analysis of high‐throughput data sets. Goals of such computation and data integration efforts are to gain a better understanding of the observable phenotypes and coordinated functions of the cell, as well as to apply developed in silico models for biological discovery and engineering applications. For mathematical computation, a number of methods have been developed to characterize models built from a metabolic reconstruction (Price et al, 2004; Stelling, 2004), and reconstructions are becoming increasingly important in understanding high‐throughput experimental data (Joyce and Palsson, 2006). Thus, a well‐curated metabolic reconstruction has a variety of uses and is of common interest to those studying systems biology relating to cellular metabolism.
The Gram‐negative rod‐shaped bacterium, Escherichia coli, has been an ideal target for metabolic reconstruction, since it is arguably the most studied and best characterized microorganism in terms of its genome annotation, functional characterization and knowledge of growth behavior (Elena and Lenski, 2003; Janssen et al, 2005). Reconstruction of the metabolic network of E. coli has been progressing since 1990 (reviewed in Reed and Palsson, 2003). This network reconstruction has been through a series of expansions and refinements (Majewski and Domach, 1990; Varma and Palsson, 1993; Varma et al, 1993; Pramanik and Keasling, 1997, 1998; Edwards and Palsson, 2000; Reed et al, 2003; Lee et al, 2005), with each iteration building on previous work while incorporating new knowledge.
Applications utilizing the E. coli reconstruction have had implications in a number of fields (for a list of applications and references, see http://gcrg.ucsd.edu/organisms/ecoli/ecoli_others.html). For metabolic engineering applications, modeling enables examination and simulation of metabolism as a whole, circumventing the possible shortcomings of methods that rely on manual assessment of a limited number of interactions and possibly fail to detect non‐intuitive causal interactions (Alper et al, 2005; Fong et al, 2005). For studies of bacterial evolution, a reconstruction serves as a highly curated database and model to examine and simulate evolutionary hypotheses (Pal et al, 2005, 2006). Network analyses have been applied to genome‐scale reconstructions of E. coli to identify sets of reactions or metabolites whose activity is interdependent. These studies have obvious implications in aiding therapeutic interventions along with other systemic analyses (Almaas et al, 2004; Nikolaev et al, 2005). Additionally, for the prospective goal of biological discovery, genome‐scale reconstructions drive discovery by identifying specific areas where knowledge is lacking, or disagreements with observations, and provide a framework for the integration of high‐throughput data (Covert et al, 2004; Reed et al, 2006b).
In this study, we expand and refine the reconstruction of the metabolic network in E. coli. The new additions include: (1) an up to date accounting for open reading frames (ORFs) in E. coli that have metabolic annotations and an alignment of the content in EcoCyc (Keseler et al, 2005), leading to the inclusion of 1260 ORFs (an increase of 356 ORFs over the previous reconstruction (Reed et al, 2003)), (2) an improved breakdown of the biomass composition, the maintenance requirements for growth and sustenance and a sensitivity analysis on the parameters used in computational modeling and (3) thermodynamic information about the chemical transformations accounted for in the reconstruction. The thermodynamic properties estimated for the model reactions and compounds were utilized to test the thermodynamic consistency of the reactions included in the reconstruction (Henry et al, 2006). This expanded version of the E. coli metabolic network will allow for additional and more comprehensive computational and experimental studies of the systems properties of E. coli metabolism. We give several such examples that use the new network reconstruction.
The results of the present study are presented in three parts. First, we describe the new content added to form the updated genome‐scale E. coli metabolic reconstruction. Second, we detail the conversion of the metabolic reconstruction into a computational model for physiological studies. Third, we present a series of applications and detailed biochemical studies that the new computational model enables.
Reconstruction content and enhancements
We generated a metabolic reconstruction consisting of the chemical reactions that transport and interconvert metabolites within E. coli K‐12 MG1655. This network reconstruction, termed iAF1260, was based on a previous reconstruction, iJR904 (Reed et al, 2003), the current functional annotation of the E. coli genome (Riley et al, 2006), content characterized in the EcoCyc Database (Keseler et al, 2005) and specific biochemical characterization studies on the metabolic machinery and capabilities of E. coli (see Supplementary information for a complete list of references). The general features of iAF1260 are given in Table I. When possible, enzymatically catalyzed reactions were linked to their corresponding ORFs through gene‐protein‐reaction (GPR) assignments (see Materials and methods and (Reed et al, 2006a)). A complete list of all reactions and metabolites for the reconstruction is given in the Supplementary information in spreadsheet and SBML formats and is also available on the web on the BiGG database (http://bigg.ucsd.edu).
The major areas of expansion of iAF1260 over previous E. coli network reconstructions come under the following five categories: (i) increased scope, (ii) compartmentalization, (iii) increased pathway detail, (iv) incorporation of reaction thermodynamics and (v) alignment with EcoCyc.
iAF1260 is significantly larger in scope than iJR904, containing 356 additional ORFs, 1146 additional reactions and 414 additional metabolites (Table I; Figure 1) (Reed et al, 2003). Furthermore, 289 reactions were removed from iJR904, of which 254 were replaced with similar reactions, whereas 35 were totally removed because they were decomposed into more discrete enzymatic steps (27 reactions, see below) or found to be incorrect (8 reactions). Most of the replacements stem from the partition of the model into three distinct subcellular compartments (discussed further below). In order to capture a complete picture of metabolism, certain proteins (e.g., acyl carrier protein) and tRNAs, which function as substrates or products, were also included in the metabolic reconstruction. The ORFs that encode the included proteins were integrated into the GPRs for the reactions in which they participate. It is worthwhile to note that 1161 ORFs (92%) included in iAF1260 have been experimentally verified (Riley et al, 2006). This number (1161) accounts for 48% of the total 2403 ORFs in E. coli that have been experimentally verified.
The reconstruction presented here was separated into three distinct cellular compartments: the cytoplasm, periplasm and extracellular space. Each metabolite in the reaction network was explicitly assigned to one or more of these three compartments (see Table I). This representation allowed the inclusion of transport systems in both the inner and outer membrane and more accurately represented the metabolic machinery available to E. coli in each compartment. Previous E. coli reconstructions have not considered the periplasm as a distinct compartment.
iAF1260 was generated to minimize the number of grouped, or lumped, reactions in the network reconstruction. Previous versions included many lumped reactions, which simply represent a summation of two or more discrete enzymatically catalyzed reactions, in metabolic processes such as membrane lipid and lipopolysaccharide (LPS) biosynthesis. Although iAF1260 includes a smaller total number of lumped reactions than previous reconstructions, some cases remain in which the reaction mechanism(s) has yet to be fully characterized in E. coli (e.g., biotin synthase Lotierzo et al, 2005).
The standard Gibbs free energy change of formation, ΔfG′o, and reaction, ΔrG′o, were estimated for most metabolites and reactions in iAF1260; 872 (84%) and 1996 (96%), respectively. All ΔfG′o and ΔrG′o values were estimated using a new implementation of the group contribution method (MD Jankowski and V Hatzimanikatis, in preparation). The 1 M reference state for the metabolite concentrations on which ΔrG′o is based does not accurately reflect the metabolite concentrations found in the cell (approximately 1 mM). Thus, we computationally adjusted all estimated ΔrG′o to the free energy change of reaction at 1 mM concentrations for all species, ΔrG′m. The distribution of ΔrG′m values for reactions in iAF1260 indicates that 84% of estimated ΔrG′m values are less than or equal to zero in the predicted direction of flux (see below), meaning that most reactions are thermodynamically feasible at 1 mM metabolite concentrations (Figure 2A). Because intracellular metabolite concentrations can differ significantly from 1 mM (typically, 0.00001–0.02 M; Albe et al, 1990), the actual free energy change of a reaction, ΔrG′, can differ significantly from ΔrG′m. This deviation of ΔrG′ from ΔrG′m due to metabolite concentrations is shown in Figure 2B (blue error bars). Uncertainties in the estimated ΔrG′o that arise from the group contribution method were also included in the calculation of the ΔrG′ ranges (purple error bars, Figure 2B). Thermodynamic estimates were further utilized in the reconstruction process (see below).
The content of iAF1260 and the EcoCyc (Keseler et al, 2005), release 10.6 and MetaCyc (Caspi et al, 2006) databases were compared to obtain a more accurate and comprehensive reconstruction. EcoCyc and MetaCyc possess a separate curation history from the database from which iAF1260 was built and are each extensively curated. A detailed comparison of these resources has resulted in a more thorough analysis and inclusion of metabolic content in iAF1260, and in EcoCyc and MetaCyc. A mapping between the reactions and compounds of EcoCyc, MetaCyc and iAF1260 was generated in the course of this process. Overall, 945 metabolites in iAF1260 (91%) were computationally and manually mapped to EcoCyc and Metacyc compounds (Supplementary Table IV). Similarly, 1308 reactions in iAF1260 (63%) were computationally mapped to reactions from EcoCyc and MetaCyc using the compound mappings. The results of these mappings are provided in Supplementary information. A key difference identified from the comparison lies in the usage of generic reactions in which enzymes exhibit broad substrate specificity. In EcoCyc, many reaction equations were obtained from the IUBMB ((NC‐IUBMB), 2006). Accordingly, EcoCyc defined compound classes to represent groups of related substrates, and those compound classes were used as reaction substrates to represent the fact that a given enzyme could act on several different substrates (i.e., compounds), without necessarily enumerating all these compounds explicitly. Since iAF1260 was converted into a computational model, all compounds in its reactions need to be explicitly instantiated. Accordingly, no compound classes or generic reactions were included iAF1260.
A breakdown of ORFs, reactions and metabolites included in iAF1260 and earlier reconstructions (Majewski and Domach, 1990; Varma and Palsson, 1993; Varma et al, 1993; Pramanik and Keasling, 1997, 1998; Edwards and Palsson, 2000; Reed et al, 2003) are given in Figure 1 and Supplementary information. Figure 1 was generated using the functional categories assigned through the clusters of orthologous groups (COGs) ontology (http://www.ncbi.nlm.nih.gov/COG/) to classify the reactions included in the E. coli metabolic reconstruction. Figure 1A details the number of ORFs from each COG functional class that were included in iAF1260, as well as five previous versions of the E. coli reconstruction, to indicate the areas in which the network reconstruction has matured with each successive release. The largest increase in coverage compared with iJR904 (Reed et al, 2003) is found in inorganic ion transport and metabolism (26–56%, respectively, 73 ORFs). Overall, amino acid and nucleotide transport and metabolism have the highest number of ORFs and percent coverage in iAF1260 (256 and 89%, respectively). Ion transport and utilization was recognized as an underrepresented area of metabolism in previous reconstructions and was specifically expanded and incorporated into simulations using iAF1260. Figure 1B and C depict the classification of reactions and metabolites in iAF1260 tied to each COG functional class. The largest number of reactions and metabolites associated to ORFs in one COG functional class is in amino‐acid transport and metabolism and cell wall/membrane/envelope biosynthesis, respectively; furthermore, lipid transport and metabolism has the highest reaction to ORF ratio (5.8), followed by secondary metabolites biosynthesis, transport and catabolism (4.6) and cell wall/membrane/envelope biogenesis (3.4). The large reaction to ORF ratio highlights the fact that the proteins in these classes act on a large number of molecules that only differ slightly in structure. Furthermore, the highest number of unique metabolites that participate in reactions from one class was from coenzyme transport and metabolism. This finding points out the specialized nature of the proteins in coenzyme transport and metabolism pathways (Figure 1).
Conversion to a computational model
Network reconstructions of the type presented herein effectively represent 2‐D genome annotations (Palsson, 2004) defining the metabolic network that is specific to a particular organism. That is, reconstructions describe both the set of components in a network and the respective interactions between them; two layers of information. A reconstruction is easily accessible and transferable once developed and can be queried for content such as genes, proteins, reactions and metabolites. These network reconstructions can further be converted through a defined series of steps into a computational model that can be used for phenotypic simulations.
The following steps are necessary to convert a network reconstruction to a predictive computational model:
Explicit assignment of the metabolites participating in a reaction. Some enzymes can act on a number of different metabolites. For modeling purposes, each of these potential metabolites needs to be explicitly defined as participating in a distinct reaction in order to outline a complete picture of metabolism. This step was incorporated in the reconstruction process of iAF1260, but is necessary for computational use of a reconstruction based on nonspecific metabolites.
Definition of a system boundary. Here, the system boundary was defined around the entire reaction network and an exchange reaction (i.e., a reaction that allows a metabolite to enter and exit the system) was made for each of the metabolites in the extracellular space compartment immediately surrounding the cell. Constraints were assigned to each of these exchange reactions during the modeling simulations to restrict the inputs and outputs of the system, depending on the simulated growth environment.
Conversion of the defined system into a mathematical format that forms the basis for a computational model. After detailing all GPRs and defining a system boundary, the reconstruction was represented in mathematical terms. The system was represented in the form of a stoichiometric matrix (see Materials and methods) and utilized in the available software platforms SimPheny, and LINDO or TOMLAB in conjunction with MATLAB (Becker et al, 2007). The dimension of the stoichiometric matrix for iAF1260 was 1668 × 2381 (# of metabolites × # of reaction species).
Curation: filling gaps in the reconstruction. In order to produce essential biomass components (amino acids, nucleotides, etc) from minimal media components, there needed to be continuous pathways from media substrates to the required metabolites for biosynthesis. In some cases, the biosynthetic pathways to produce these metabolites were incomplete. A good example is in the biosynthetic pathway for the amino acid l‐proline. After reconstruction of the enzymatically catalyzed reactions in the pathway, there was no continuous pathway for the de novo generation of l‐proline. As a result, the spontaneous reaction l‐glutamate 5‐semialdehyde dehydratase was needed to complete the pathway and was added to the model with no gene association (Williams and Frank, 1975). In addition to spontaneous reactions, there were also essential reactions for which the catalytic enzyme is yet to be identified (see Supplementary information and http://ecocyc.org/enzymes.shtml). Flux balance analysis (FBA) in conjunction with a biomass objective function (BOF), see below, was used to aid in filling the gaps in iAF1260 and results from this analysis are given in the Supplementary information.
Determining strain specific parameters. In order to examine the networks ability to fulfill the biomass requirements needed for cellular growth, we generated a set of biomass BOFs. The BOFs were linear combinations of experimentally measured metabolites (along with quantities) commonly present in cellular biomass (see Table II and Supplementary information), and the included metabolites and amounts of each were further judged for inclusion in this equation through interpretation of gene essentiality data (see Materials and methods). The process of determining maintenance requirements is outlined in detail below.
After the conversion of the reconstructed network into a computational model, a constraint‐based approach was used in the context of generating essential biomass components to predict cellular phenotypes under different genetic and environmental conditions.
Application of iAF1260 to predict cellular phenotypes
A computational model can be used to predict and quantify the active pathways and probable system outputs during growth given a set of inputs that represent growth medium conditions. Analyzing metabolic models in the context of generating maximal amounts of biomass precursors (i.e., simulated optimal growth) from available media substrates using FBA can generate results that are consistent with experimental data (Edwards et al, 2001; Covert and Palsson, 2002; Ibarra et al, 2002; Covert et al, 2004). Thus, we used iAF1260 to predict the physiological state of E. coli in selected growth conditions using this constraint‐based approach (see Materials and methods). It is worthwhile to note that the constraint‐based computations performed in this section can be readily reproduced utilizing the iAF1260 SBML files (see Supplementary information) and available implemented algorithmic methods (Becker et al, 2007).
Although iAF1260 contains a comprehensive picture of E. coli metabolism, there also are other events that need to be accounted for to computationally predict growth capabilities. Three specific issues arose in computational simulations using iAF1260.
Transcriptional regulatory events. A transcriptional regulatory network can be used to determine which ORFs are being transcribed under a given condition (Covert et al, 2004; Barrett et al, 2005), thus reducing the number of available pathways under a given growth condition. The events can also limit the rate at which certain enzymes are transcribed, therefore, they are important to apply to a given simulation (Covert et al, 2004).
Maintenance costs. Additional energetic requirements exist for growth beyond what is needed to generate the macromolecular content of the cell (beyond the metabolic costs, which are accounted for directly in the reaction network) (Pirt, 1965; Neidhardt et al, 1990). These energetic maintenance requirements are for growth‐associated maintenance (GAM, e.g., protein polymerization costs) and non‐growth‐associated maintenance (NGAM, e.g., membrane leakage) and can be estimated through ATP utilization costs (see Materials and methods).
Reaction kinetic effects. Kinetic issues affect metabolism. A potential result from kinetic limitations is that the cell does not always use the most efficient pathways during growth (Gennis and Stewart, 1996; Helling, 2002). Currently, reaction kinetics are infeasible to incorporate on the genome‐scale primarily because of the large number of unknown in vivo kinetic parameters and concentrations. However, we know that kinetic effects can influence the utilization of certain pathways, such as the electron transport system (ETS) in E. coli (Helling, 2002).
2, Figure 3 demonstrates how we addressed the three modeling issues outlined above when using FBA with iAF1260 to predict the physiological state of E. coli growing aerobically on glucose. Initially, all of the pathways characterized in iAF1260 were represented in a computational framework (Figure 3A). We then constrained the reactions that correspond to ORFs that are not transcribed under aerobic glucose conditions to zero allowable flux in the network using the Boolean gene regulatory rules based on 104 transcription factors established by Covert et al (2004), Figure 3B, effectively eliminating 152 reactions (see Supplementary information). Using the reduced network, we then constrained the maximum allowable P/O ratio of the ETS by using observations and predictions from previous studies. E. coli possesses two NADH dehydrogenase components (NDH‐1 (nuo) and NDH‐2 (ndh)) and two terminal oxidases (bo‐type (cyo) and bd‐type (cyd) oxidase) in the system (Calhoun et al, 1993; Gennis and Stewart, 1996). Different combinations of these respiratory components can result in an overall translocation that can range from 2 H+/2e− to 7 H+/2e− in iAF1260. The specific constraint we placed on the system was to split the flux ratio between the two NADH dehydrogenases 1:1 (NDH‐1:NDH‐2), allowing a P/O ratio between 0.5 and 1.375 (Figure 3C) (Calhoun et al, 1993; Noguchi et al, 2004).
Using chemostat data for E. coli growing aerobically on glucose (see Supplementary information), we estimated the GAM and NGAM costs (Figure 3D). We found that an NGAM value of 8.39 mmol ATP gDW−1 h−1 and a GAM value of 59.81 mmol ATP gDW−1 best fit the experimental data. Using these values and no restriction on pathway choice for the ETS, we calculated the line of optimal growth using FBA for aerobic growth on succinate. This line was plotted against the measured values for wild‐type batch growth determined by Edwards et al (2001). The calculated line of optimality corresponds to the conditions (substrate uptake and product generation rates), which can maximize the biomass yield. The results show that most of the measured values lie very near the line of optimality in the experimental range examined (see Figure 3E).
To further examine the agreement between modeling simulations and experimental data, computationally predicted flux values, product formation rates and growth rates (GRs) were compared with experimentally determined values derived from 13C labeling experiments (Fischer et al, 2004). Using measured glucose and oxygen uptake rates (OURs) as modeling constraints (Fischer et al, 2004), FBA was used to examine the predicted network flux distribution when optimizing for flux through the BOFCORE reaction (see Materials and methods). The produced flux distribution accurately predicted both the growth and acetate secretion rate using the measured average glucose and OURs from triplicate 13C‐labeled experiments. Additionally, the CO2 production rate was accurately predicted when considering the standard deviation on the reported uptake values. Both the experimental and computational results suggest that no other carbon containing products were generated in measurable amounts. Examining the flux distribution in central metabolism, there was complete agreement in the direction of flux through the glycolytic, pentose phosphate, TCA and pyruvate metabolism pathways between modeling and experimental results. For the Entner–Doudoroff pathway, the experimentally determined flux was equal to or less than 4% of the total glucose flux entering the system, whereas no flux was predicted for this pathway for an optimal growth solution using iAF1260. Looking at the quantitative values for 22 individual central metabolism fluxes (Fischer et al, 2004), the experimentally reported and computationally predicted values were in good agreement (mean of the difference=8±1.4% (s.e.), R2=0.96, where fluxes were normalized to glucose uptake rates (GURs) being 100%). The most notable discrepancy when comparing the computational and experimentally reported values was in the pentose phosphate pathway, where 26% of the total glucose flux entering the system was calculated to be shuttled through this pathway when analyzing the 13C labeling data, and the model predicted a value of 46% during an optimal growth solution. All of the flux values predicted for other central metabolism pathways agreed well with the experimental flux data.
Thermodynamic consistency analysis
Previous metabolic network reconstructions have focused on the chemistry of the reactions that take place and their genetic basis. The physicochemical characteristics of the reactions, namely thermodynamic and kinetic properties, have not been incorporated. The kinetics are hard to obtain and change with organism adaptation and evolution (Herring et al, 2006). Conversely, the thermodynamic properties represent physicochemical limitations that can be estimated and taken into account (Beard et al, 2002; Kümmel et al, 2006a; Henry et al, 2007). In forming iAF1260, we incorporated thermodynamic information (see Figure 2) to provide another means of assessing reaction reversibility beyond what is stated in the primary literature and assignments made using general heuristic rules (see Materials and methods).
Through a process termed thermodynamic consistency analysis, the thermodynamic estimates were utilized to evaluate the reversibility and directionality assigned to the reactions in the reconstruction based on the primary literature and heuristic rules. First, flux variability analysis (FVA) (Mahadevan and Schilling, 2003) was utilized in combination with the calculated ΔrG′ ranges to identify reactions that operated in a thermodynamically infeasible direction during near optimal growth on at least one carbon source (see Materials and methods). The co‐substrates and cofactors involved in these inconsistent reactions were adjusted (either the participants or stoichiometries) with guidance from the literature so that the reactions in the final version of the reconstruction were not thermodynamically infeasible in any of the directions in which they must operate for near optimal growth on 174 carbon sources.
One example of an initially thermodynamically inconsistent reaction that was altered is the hydrogenase 3 catalyzed reaction, formate‐hydrogen lyase. This reaction initially powered the transport of 1.3 protons across the cell membrane while oxidizing formate to hydrogen and carbon dioxide (Hakobyan et al, 2005). Thermodynamic analysis of this reaction indicated that the intracellular portion of this reaction is already unfavorable, with a ΔrG′o and ΔrG′m of 2.1±1.7 kcal/mol, in agreement with reported values (Thauer et al, 1977; Alberty, 2003). Given the concentration gradients achievable in vivo, it was found to be highly improbable that this already unfavorable reaction could power the transport of 1.3 protons across the cell membrane. As a result, the transmembrane transport portion of this reaction was removed.
Some of the other thermodynamically inconsistent reactions identified prompted the adjustment of the reversibility for network reactions and also, expansion of the reconstruction content. For example, we identified thermodynamic infeasibilities in the reactions involving transport of the inorganic ions (i.e., Fe2+, Cu2+, etc). Initially, the only reactions in the model allowing for the transport of these ions across the cytoplasmic membrane were reversible diffusion reactions of the form:
According to FVA, during growth on some carbon sources, these metal ions could be exported from the cell. However, based on our thermodynamic calculations, we determined that these reactions are only thermodynamically feasible in the direction of import where the transmembrane electrochemical potential contributes energy to the transport process (Henry et al, 2006). The literature confirms that whereas import of these ions proceeds via diffusion through a regulated ion channel, export of these ions requires a separate mechanism that utilizes ATP hydrolysis or proton antiport as a source of energy to drive the reaction (Silver, 1996; Grass et al, 2005). These alternative export reactions were consequently added to the reconstruction.
The FVA performed as part of the thermodynamic consistency analysis further allowed the reactions in the reconstruction to be functionally classified as essential (requiring a nonzero flux), substitutable (capable of carrying zero or non‐zero flux) or blocked (zero flux) during growth on each of the 174 carbon source studied. Interestingly, a large number of the reactions in the reconstruction behaved uniformly regardless of the carbon source being utilized (2, Table III). Many reversible reactions only operated in a single direction despite being reversible, whereas many other reactions were predicted not to operate in any of the FVA studies performed. These reactions are potentially involved dead‐ends in the reconstruction or conversely, were limited because of the BOF used to examine the network.
Once the reactions that operated in thermodynamically infeasible directions according to the FVA were identified and adjusted to remove all thermodynamic inconsistencies, we examined the ΔrG′ ranges calculated for all of the reactions defined as reversible based on the primary literature or heuristic rules. Through comparison with predicted ΔrG′ values, we identified many reactions that were originally specified as reversible and were actually thermodynamically irreversible (i.e., reactions being incapable of achieving both negative and positive values of ΔrG′ under physiological conditions). We corrected these reversible reactions to be consistent with our thermodynamic estimates (i.e., made them irreversible). In total, after checking for consistency, 553 reactions in iAF1260 were assigned as reversible and 1524 reactions were assigned as irreversible.
Looking at the reversibility of the reactions predicted using thermodynamic estimates alone, 1673 (84%) of the reactions for which ΔrG′o could be estimated were predicted to be reversible, whereas 323 (16%) were predicted to be irreversible. This finding indicated that reaction reversibility specified in the reconstruction was more restrictive than what is called for by thermodynamic analysis alone. The primary reason for this more restrictive property is that the reversibility set forth for the reactions in the reconstruction is often based on the physiological behavior of the reactions in the cell, not using the relatively broad concentration range achievable for metabolites along with the uncertainty inherent in the utilized method. Comparing these values with another approached, the method used in this work recognized 323 (16%) reactions as being irreversible, whereas Kümmel et al (2006b) recognized 130 (14%) reactions as being irreversible in the iJR904 network (Reed et al, 2003), utilizing a similar thermodynamic‐based assignment and an additional assignment through heuristic rules.
To determine the sensitivity of the computational results (e.g., optimal product formation rate) generated using FBA with iAF1260, we varied independently the: (i) constraints imposed by transcriptional regulation on the network, (ii) metabolites included in the BOF, (iii) macromolecular content of the cell, (iv) effective P/O ratio in aerobic growth and (v) the maintenance costs associated with growth (i.e., NGAM and GAM). This analysis was performed using simulations of optimal growth under aerobic glucose‐limited conditions.
In order to examine the overall regulatory effects on the computational results, we performed simulations both with the constraints outlined earlier (Covert et al, 2004) and with no transcriptional regulatory constraints (see Materials and methods and Figure 3). The resulting optimal GR and OUR for a given GUR (i.e., the line of optimality) predicted using FBA was found to be insensitive to the regulatory constraints placed on the system under these conditions (Supplementary Figure 1). However, the regulated network was less flexible in terms of the number of reactions that could possess a non‐zero flux for an optimally predicted GR (33 less reactions). This result is not altogether surprising given that glucose is a preferred substrate for growth on one carbon source and thus, regulation had likely evolved to limit the uptake of additional carbon sources (Covert and Palsson, 2002). Similarly, comparing the use of the BOFWT and the BOFCORE for predicted optimal growth using FBA, the line of optimality produced was essentially identical in both cases (Supplementary Figure 1). However, there were 95 more reactions that required a non‐zero flux value for an optimal solution in the network using the BOFWT in FBA simulations. This result is expected since the BOFWT is comprised of more metabolites requiring more active fluxes for their synthesis (see Table II).
To examine the effect of changing the macromolecular composition represented in the BOF, we varied the weight percentage of the three largest macromolecules in the cell (Table II and Figure 4A–C) in FBA simulations. We thus generated new BOFs varying the protein content from 50–80 wt%, the RNA content from 10–25 wt% and the lipid content from 7–15 wt% of the cell based on recorded experimental values (Pramanik and Keasling, 1997). While the macromolecular composition of the BOFCORE had some effect on the overall optimal GR and OUR, the most extreme variance was, at most, 5 and 8% at the median GUR in the range examined, respectively. Previously, Pramanik and Keasling (1997) evaluated a BOF that was GR dependant and determined that the building blocks that make up the macromolecular content of the cell (e.g., the amino acids that make up the protein content) are essentially constant when E. coli is grown under different growth conditions and any small changes in these compositions do not significantly affect calculated reaction flux values (Pramanik and Keasling, 1998). Therefore, this variable was not examined.
The P/O ratio of the ETS in E. coli was varied to determine its effect on optimal solutions produced using iAF1260 and FBA. The maximum value that the P/O ratio can achieve under aerobic conditions is 1.75, based on the stoichiometry of the ETS enzymes in iAF1260. Since there is some debate on the possible overall stoichiometries of the ETS in E. coli (see above), we further increased the potential maximum to 2.7 in our analysis and tested the effect of a P/O ratio ranging from 1.0 to 2.7. Specifically, a P/O ratio of 2.7 could be achieved if the most energy efficient pathway was used exclusively and the ETS possessed an ATP synthase with a stoichiometry of 3 H+/ATP and an NDH‐1 with a stoichiometry of 4 H+/2e−. A P/O ratio of 1.0 is an estimated low‐end value for aerobic growth. The analysis indicated that the modeling results are most sensitive to the P/O ratio than any other variable examined in this analysis. Optimal GR and OUR predictions varied, at most, 37 and 71% at the median GUR in the range examined, respectively.
Finally, we analyzed the effects of maintenance energy on optimal growth predictions. We varied the values of the NGAM and GAM±50% of the most consistent values of 8.39 mmol ATP gDW−1 h−1 and 59.81 mmol ATP gDW−1, respectively. The region that the line of optimality could posses for the varying maintenance energies was plotted in Figure 4E and F. The NGAM can affect the optimal GR and OUR predictions, at most, 8 and 15% and the GAM 16 and 31% at the median GUR in the range examined, respectively. Thus, these also are important variables to consider in FBA simulations of optimal growth under these conditions. Looking at the specific effect that each variable inflicts on the system; the NGAM shifts the intercept of the line of optimality with the GUR and OUR axes, whereas the GAM values change the slope of the line of optimality. The impact of the sensitivity analysis is addressed in the discussion.
Context for content
As high‐throughput data become available for a number of organisms (Joyce and Palsson, 2006), there is a need for an underlying platform to analyze these data by placing them in a biological context. Genome‐scale metabolic reconstructions, such as iAF1260, offer such a basis, since they are biochemically and genetically structured databases. As a result, they can be utilized to interpret high‐throughput data in analyses looking at specific reactions, pathways or even genome‐wide trends.
Context for content: analysis of alternate growth conditions
Similar to our previously described application of iAF1260 to predict the physiological state of E. coli growing under an aerobic glucose or succinate limiting condition, we also performed a broader analysis to determine all of the additional carbon, nitrogen, phosphorus and sulfur sources that could support simulated growth in minimal medium and compared this with findings using iJR904 (Reed et al, 2003). Overall, there were 174 carbon, 78 nitrogen, 49 phosphorous and 11 sulfur sources that were predicted to support growth using FBA and iAF1260 (see Table IV and Supplementary information); an increase over iJR904 by 84 carbon, 44 nitrogen, 45 phosphorous and nine sulfur sources. We compared the computational results to a high‐throughput experimental screen using the Biolog platform (http://www.biolog.com). Table IV details the comparison between the computational and experimental predictions. The overall agreement is approximately 76% using iAF1260, compared with 60% for iJR904. This result reflects the increased scope of iAF1260 to analyze a wider range of growth conditions and helps validate the content of iAF1260.
Disagreements between the computational and experimental data fall into two main categories and, going forward, will be resolved by different approaches. Cases in which computational growth is predicted and not observed experimentally indicate possible areas where there are either errors in the reconstruction or alternatively, where regulation limits the utilization of pathways needed for growth. This type of false positive for growth increased with iAF1260 since the network increased in total reactions available to support growth. In contrast, instances where experimental growth is observed and no growth is predicted computationally point to areas where further biochemical characterization is needed for E. coli and define targeted areas for biological discovery (Reed et al, 2006b). These false negatives for growth were significantly reduced from iJR904 to iAF1260 and clearly demonstrate the effect of the expanded content on computational simulations. Additional targets for model‐driven expansion can be found in Supplementary information.
Context for content: gene essentiality analysis in iAF1260
We used the reconstruction as a framework to analyze the conditionally essential ORFs identified for E. coli K‐12 (Baba et al, 2006; Joyce et al, 2006). A comparison between the computationally predicted essential ORFs and the experimental data (Baba et al, 2006; Joyce et al, 2006) is provided in Table V and Figure 5. Gene essentiality predictions under glucose aerobic conditions using iAF1260 show an overall increase in the number of ORFs that can be examined and correctly predicted when compared with iJR904 (an increase of 356 and 357 ORFs, respectively). There also is a modest improvement in overall accuracy (92% compared with 88%, see Table V; Supplementary Table III). These findings provide confidence for using iAF1260 to investigate previously unstudied conditions and examining the specific functionality that an essential (or non‐essential) ORF provides for the system under that given condition. The agreement between the experimental and computational results, on the whole, validates the content of the reconstruction and the modeling procedure (assuming a low error rate in the experimental data).
Disagreements between the experimental and computational data point to further areas of refinement and expansion of the metabolic and regulatory networks know for E. coli, as well as possible errors in the experimental data and model. The disagreements where ORFs were found to be computationally essential, but experimentally non‐essential, point to specific areas where additional intracellular and transport reactions can be examined to rectify the disagreements (29 cases, see Table V). For example, the ubiC gene was predicted to be essential for its involvement in the ubiquinone biosynthesis pathway. This finding points to the fact that additional work is needed to characterize the full complement of genes responsible for the aerobic and anaerobic production of ubiquinone (Alexander and Young, 1978). Additionally, eight of the 29 cases were predicted to be essential for thiamine biosynthesis, an essential cofactor in E. coli. This result suggests a likely error in the experimental data and is supported by Vander Horn et al (1993). ORFs that are found to be experimentally essential but computationally non‐essential suggest potential regulatory effects on the system and possible inaccuracies in the metabolic network (79 cases, see Table V). Transcriptional regulation limits network pathways under a given condition; therefore, computational disagreement could arise if such pathways are computationally utilized. Disagreements in this class also identify a current limitation of the model. The action of 18 tRNA charging reactions are contained in the reconstruction, but are not currently accounted for in the modeling scheme. The resulting computational disagreements will likely be resolved through expansion of the network to include transcription and translation processes in the cell. For a complete list of the computational and experimental disagreements, see Supplementary information.
Metabolic reconstruction and subsequent mathematical computation has become a useful tool in the post‐genomic era by aiding both biological computation and experimentation. In this work, we present, characterize and utilize the iAF1260 metabolic reconstruction of E. coli K‐12 MG1655. The reconstruction serves as both a BiGG database containing the current knowledge of E. coli metabolism, as well as a framework for mathematical analysis. Accordingly, the major contributions from this work are: (1) an expansion in size, scope and detail of the metabolic network of E. coli, effectively exhausting the available literature, (2) an enumeration and description of the parameters and methods needed to utilize the reconstruction as a predictive model; examples of simulation results compared with high‐throughput experimental data are presented and (3) the inclusion of thermodynamic information and a novel thermodynamic consistency analysis for chemical transformations accounted for in the reconstruction.
iAF1260 represents the largest metabolic reconstruction of any unicellular organism and accounts for 1260 ORFs (28%) in the current E. coli genome annotation (Riley et al, 2006). Furthermore, 1161 of the included ORFs (92%) have experimentally‐based functions, conferring a high degree of confidence in the corresponding interactions. Just as gene annotation and sequence databases are used to identify and characterize genes in newly sequenced genomes, iAF1260 will similarly serve as a primary reference for future metabolic reconstructions. Because of its curation history and size, future reconstructions, especially those for closely related organisms, will draw directly from this content. This process will further be aided by the synchronization and mapping with the EcoCyc database. The next step in the expansion of the E. coli metabolic network will require further discovery of metabolic functions and computational methods are needed that can facilitate this process (Reed et al, 2006b).
In addition to expanded content, significant advancements in reconstruction techniques and methods used to determine network capabilities were presented. Thermodynamic consistency analysis represents a novel way to flag or highlight highly improbable intracellular and transport reactions for further evaluation. This approach can be added to future metabolic reconstruction and modeling projects. It effectively constitutes a QC/QA test that should improve the utility and scope of modeling predictions. Additionally, the use of a core biomass BOF (BOFCORE) has identified an improved strategy to probe gene essentiality for growth. Previous analyses examining gene essentiality have utilized a BOF, which is based on measurements from a specific growth environment and is also constant in the type and relative proportion of metabolites. A common problem that arises when using a BOF based on wild‐type measurements is that potential false positives can be generated when conditionally essential metabolites are inappropriately included in the BOF (Ghim et al, 2005; Imielinski et al, 2005). The BOFCORE presented here, with continual refinement guided by experimentation, should increase the accuracy and utility of computational predictions with respect to mutant phenotype predictions.
The approach taken to evaluate reaction reversibility in iAF1260 was to prevent the inclusion of reactions that were highly unlikely to be reversible. This approach was carried out by using the thermodynamic consistency analysis and subsequent analysis of reaction thermodynamic estimates. Due to the thermodynamic coupling of reactions operating simultaneously, reactions that are individually thermodynamically reversible under physiological conditions will not necessarily be reversible when operating in concert with the other reactions in the cell. In line with this, using reaction reversibility determined from the thermodynamic analysis of individual reactions alone with FBA will result in improper model behavior due to the operation of thermodynamically infeasible pathways and cycles. Only if thermodynamic constraints are used in conjunction with the mass balance constraints of FBA to prevent the operation of these thermodynamically infeasible pathways (for example, Henry et al, (2007)) can the reaction reversibility determined for individual reactions be used. Therefore, utilization of the thermodynamic information presented to fully assign reversibility and irreversibility in modeling simulations automatically requires additional implementation of methods, which consider thermodynamics on the systems level.
With the increasing use of network reconstruction and the constraint‐based modeling approach, a need has emerged to clearly define and demonstrate the steps required to computationally utilize a reconstruction. By outlining these steps and examining the sensitivity of modeling parameters used in computations, we have both explicitly defined the protocol and revealed the impact of modeling parameters on predictions. A computational software package is also available to efficiently implement such metabolic modeling (Becker et al, 2007). A sensitivity analysis of key strain‐specific parameters, using an early version of the reconstructed E. coli network (Varma and Palsson, 1995), found that the P/O ratio significantly affects the GR and flux predictions, whereas varying the BOF had relatively little effect. However, our analysis shows a greater dependence on the maintenance parameters calculated for these conditions. This result is primarily due to our testing of a broader maintenance value range (±50% of the calculated values as opposed to 20% by Varma and Palsson (1995)). This larger value was selected because it is approximately the amount of the GAM that is difficult to quantify (i.e., unknown maintenance that accounts for gradient maintenance, protein turnovers and so forth; Neidhardt et al, 1990) and produced a range that can be justified by examining different E. coli growth data (results not shown). Future projects should take into account the impact of the influential parameters (i.e., P/O ratio, growth maintenance) when designing their computational studies.
The culmination of the increased size and expanded coverage of the reconstruction, in combination with the improved reconstruction techniques, has broadened the scope and accuracy of computational predictions. Comparisons of iAF1260 simulations with experimental data for gene‐essentiality and growth phenotypes showed an overall increase of 4 and 16% over iJR904 predictions, respectively. Specifically, iAF1260 is markedly improved in analyzing and predicting a wider range of minimal media growth conditions (see Table IV). It can also better predict and screen the essential genes needed for viability in E. coli (see Table V). The one area where it appears that the model's ability to match experimental data decreased was where ORFs were found to be experimentally essential but computationally non‐essential. This area can be addressed through further expansion of the reconstruction's scope (e.g., by including the transcriptional and translation machinery in E. coli as well as transcriptional regulatory effects) and targeted experimentation (e.g., elucidating the entry step into the de novo biosynthesis of biotin).
Future directions for improvement of the metabolic reconstruction of E. coli remain. As previously stated, the scope of the reconstruction will continually increase. Dead‐ends and lumped reaction in the reconstruction point to specific areas of E. coli metabolism that can be further characterized in this expansion effort. A computational approach to resolve these dead‐ends that utilizes constraint‐based methods can be used in this effort. Additionally, an area for further compartmentalization of metabolites in the reconstruction is for metabolites located in the lipid bilayers. For example, a lipid on the inner leaflet of the outer membrane is different than one on the outer leaflet of the inner membrane, but currently in the reconstruction, they are both located in the periplasm. Further advancements in modeling will also be achieved through acquisition of additional experimental gene essentiality studies under different minimal media conditions to better define the core metabolites needed for viability and improve overall computational accuracy. Advancements are also likely to arise from additional incorporation of reaction and system thermodynamics.
In summary, iAF1260 represents a significantly expanded and comprehensively verified reconstruction of the E. coli metabolic network with broadened and enhanced predictive capabilities. With the growing number of studies based on previous versions of this reconstruction appearing, this work will enable a wider spectrum of studies focused on both proximal (i.e., immediate) and distal (i.e., over time) causation in biology. As the field of systems biology expands to incorporate cellular interactions from multiple core functions (e.g., regulation, signaling, etc.) on the genome scale, iAF1260 will serve as a key component for the study of E. coli by providing an extensive picture of cellular metabolism.
Materials and methods
The reconstruction process has also been previously outlined (Feist et al, 2006; Reed et al, 2006a). Here, we provide certain details specific to this work. Starting from the metabolic network for iJR904 (Reed et al, 2003), additional reactions were added to the network based on E. coli‐specific biochemical characterization studies (see Supplementary information for a complete list of references) and other reactions were removed (see Results). This process was aided by comparing the content of iJR904 with the EcoCyc database (see below). The E. coli genome annotation (Riley et al, 2006) was used as a citation source for biochemical characterization studies and a framework upon which translated metabolic proteins, and subsequently reactions, were assigned to form gene to protein to reaction (GPR) assignments. The SimPheny™ (Genomatica Inc., San Diego, CA) software platform was used to build the reconstruction. For each reaction entered into the reconstruction, the involved metabolites were characterized according to their chemical formula and charge determined using their pKa value for a pH of 7.2. Metabolite charge was determined using its pKa value(s). When the metabolite pKa was not available, charge was determined using the pKa of ionizable groups present in a metabolite (http://www.chemaxon.com/product/pka.html). All of the reactions entered into the network were designated as enzymatically catalyzed reactions or spontaneous reactions, were both elementally and charged balanced and are either reversible or irreversible. Reversibility was determined first from primary literature for each particular enzyme/reaction, if available (see Supplementary information for references). Additionally, general heuristic rules, like those applied by Kümmel et al (2006b), were used to enter reversibility using knowledge about the physiological direction of a reaction in a pathway (sometimes including regulatory knowledge) and/or basic thermodynamic information (such as reactions hydrolyzing high‐energy phosphate bonds are almost always irreversible). Furthermore, a thermodynamic analysis of reversibility was utilized to assign the directionality of some reactions (see above).
Comparison of iAF1260 and the EcoCyc and MetaCyc databases
The comparison between the content of the iAF1260 and the EcoCyc (Keseler et al, 2005) and MetaCyc (Caspi et al, 2006) databases was performed in three phases. Initially, a list of metabolic ORFs contained in EcoCyc and not in iJR904 (the previous reconstruction) was manually evaluated for inclusion in iAF1260 in an effort to merge content. A total of 176 out of 308 ORFs from this list were included into iAF1260 from manual analysis of this list or were included before this analysis from primary literature in a separate effort. Many of the inclusions in this phase were transporter encoding ORFs. A common type of ORF that was not included were those acting on nonspecific metabolites (e.g., nonspecific drugs), proteins or RNA molecules.
The second phase of the comparison consisted of generating a complete mapping of the metabolites contained in iAF1260 and EcoCyc or MetaCyc. This phase permitted the inclusion of compounds in each database that were missing from the other and identified possible errors in enzyme substrate specificity and metabolite structure. It also provided a future reference for linking of the metabolite content between the two resources. In an initial automated effort, mappings between metabolites in iAF1260 and EcoCyc/MetaCyc were established computationally using textual matching between the official name in iAF1260 to the common name and/or synonyms of metabolites in EcoCyc/MetaCyc, version 10.6. In addition, when available in both data sets, KEGG identifiers and CAS numbers were used to double‐check matches or to make additional matches. After this computational step, 871 out of 1039 metabolites in iAF1260 were mapped to EcoCyc/MetaCyc. The remaining metabolites were mapped manually and changes to the content of iAF1260 made during this mapping process were facilitated by cross‐referencing the ORFs that encoded for the proteins that acted on specific metabolites in iAF1260 with their annotation in EcoCyc (see Results for findings and Supplementary information for the mapping).
The final phase of the comparison was an automated mapping between reactions contained in iAF1260 and EcoCyc/MetaCyc. This phase generated a list of high‐confidence reactions that both iAF1260 and EcoCyc contained, and provides a future reference for a full merging of the reaction content between the two resources. The automated reaction mapping was performed with software written specifically for this task, to accommodate frequently occurring types of differences between the models. The matcher parses the equations of every reaction R in iAF1260 and uses the previously described metabolite mappings to find the reaction object in EcoCyc/MetaCyc that contains the same set of metabolites as does R. Numerous reactions in iAF1260 contain protons in the equation that do not appear in EcoCyc, and the matcher can take into account this and other similar differences. The matcher also tries to find a generic reaction in EcoCyc that is specified in terms of compound classes, if the metabolite instances used in the equation in iAF1260 did not yield a direct match.
Generation of the biomass BOF
The biomass BOF was generated by defining all of the major and essential constituents that make up the cellular biomass content of E. coli. To determine these metabolites and their quantity, we used the dry weight composition data for an average E. coli B/r cell growing exponentially at 37°C under aerobic conditions in glucose minimal medium, with an approximate doubling time of 40 min having a dry cell weight of 2.8 × 10−13 grams (Neidhardt et al, 1990) (Table II; Supplementary information). Each cellular biomass macromolecule (i.e., protein, RNA, DNA, etc.) was divided into its corresponding metabolic precursors present in the reconstruction (for example, l‐alanine, UTP or dTTP, respectively). Each of the precursor metabolites was assigned a value that it contributes to the total percentage of the macromolecule, except for the soluble pool metabolites (e.g., thiamine diphosphate). This process was followed so that if the overall quantities of macromolecules were changed, the corresponding precursor metabolite would be scaled appropriately (see Sensitivity analysis section). The quantity of soluble pool metabolites (approximately 2.9% of the total biomass) was taken from experimentally measured values or alternatively, it was estimated as a 0.1 mM intracellular concentration (see Supplementary information for a complete list of references). From this data, a linear biomass BOF was formulated based on the wild‐type cell composition for E. coli and an ATP maintenance approximation to account for non‐metabolic processes (see Supplementary information). Using FBA, the model was analyzed to determine if each BOF metabolite could be generated from the defined minimal medium under both aerobic and anaerobic conditions with d‐glucose, d‐ribose and glycerol as the carbon and energy source. Only metabolites identified as cofactors could not be generated from the glucose minimal medium (discussed in Supplementary information).
Using the BOFWT, gene essentiality and published data, a ‘core’ BOF was formulated that was consistent with the minimal set of macromolecular molecules needed for cell viability. The 20 common amino acids, inorganic ions and nucleotide metabolites were all considered essential (Neidhardt et al, 1990). For the other BOFWT metabolites, each metabolite was evaluated individually to determine if the genes that were necessary to synthesize the metabolite from minimal media substrates (see Supplementary Table II) were essential (Baba et al, 2006; Joyce et al, 2006). One macromolecule, glycogen, was not essential for cell viability because there were no essential ORFs encoding for enzymes in the synthesis or breakdown of glycogen. The essential metabolites were defined by identifying the end product from the closest essential reaction to the BOFWT metabolite (Table II) in the possible de novo pathway(s) for biosynthesis. Molecules in this group, such as riboflavin, were determined to be essential, whereas the wild‐type outer membrane E. coli K‐12 LPS molecule was not found to be essential. However, a precursor of the common wild‐type LPS molecule, KDO2‐Lipid A, was found to be essential for cell viability (Raetz, 1996). Alternatively, ‘core’ metabolites were also determined from specific published studies. For example, thiamine diphosphate was found to be essential (Vander Horn et al, 1993), whereas phosphatidylglycerol was determined not to be essential (Kikuchi et al, 2000).
The ATP maintenance approximation in the BOFs, which account for non‐metabolic processes were approximated with the ATP utilization equation,
where the number of ATP equivalents hydrolyzed is characterized in the GAM variable. The entire BOF is given in mathematical terms in Supplementary information.
Aside from the BOF maintenance, an NGAM (mmol ATP gDW−1 h−1) value was used as an energy ‘drain’ on the system during the linear programming calculations and accounts for non‐growth cellular activities (Pirt, 1965). The NGAM was represented as a defined flux in the reaction flux vector, vNGAM (see below and Supplementary information).
A stoichiometric matrix, S (m × n), was constructed for iAF1260, where m is the number of metabolites and n is the number of reactions. The corresponding entry in the stoichiometric matrix, Sij, represents the stoichiometric coefficient for the participation of the ith metabolite in the jth reaction. FBA was then used to solve the linear programming problem under steady‐state criteria (Price et al, 2004) represented by the equation:
where v (n × 1) is a vector of reaction fluxes. Since the linear problem is normally an underdetermined system for genome‐scale metabolic models, there exist multiple solutions for v that satisfy equation 2. To find a particular solution for v, the cellular objective of producing the maximal amount of biomass constituents, represented by the ratio of metabolites in the BOF, is optimized for in the linear system. Additionally, constraints that are imposed on the system are in the form of:
where α and β are the lower and upper limits placed on each reaction flux, vi, respectively. For reversible reactions, −∞⩽vi⩽∞, and for irreversible reactions, 0⩽vi⩽∞. The constraints on the reactions that allow metabolite entry into the extracellular space were set to 0⩽vi⩽∞ if the metabolite was not present in the medium, meaning that the compounds could leave, but not enter the system. For the metabolites that were in the medium, the constraints were set to −∞⩽vi⩽∞ for all except the limiting substrate(s) (e.g., glucose and/or oxygen). The reaction flux through the BOF was constrained from 0⩽vBOF⩽∞.
Linear programming calculations were performed using SimPheny™ (Genomatica, San Diego, CA) and the LINDO (Lindo Systems Inc., Chicago, IL) or TOMLAB (Tomlab Optimization Inc., San Diego, CA) solvers in MATLAB® (The MathWorks Inc., Natick, MA) with the COBRA Toolbox (Becker et al, 2007).
When comparing the flux distribution in central metabolism to experimentally reported values (Fischer et al, 2004), all of the comparisons were performed using computational results when optimal growth is predicted using the BOFCORE, the 152 regulated reactions under these conditions constrained to zero (see above), a split in the flux ratio between the two NADH dehydrogenases of 1:1, an NGAM value of 8.39 mmol ATP gDW−1 h−1, a GAM value of 59.81 mmol ATP gDW−1 and iAF1260. An FVA on the optimal flux distribution yielded no flexibility in the central metabolism pathways examined in this study. From the Fischer et al (2004) study, data from E. coli growth in reactor conditions were used because the oxygen uptake and CO2 secretion rates were reported, and the flux values that were used were based off 13C‐constrained flux balancing.
The sensitivity analysis was performed under aerobic glucose‐limiting minimal medium conditions. For each analysis, the parameter being examined was varied while the GUR was sequentially set between 0 and 10 mmol gDW−1 h−1 for a series of simulations, with the maximum OUR set to 18.5 mmol gDW−1 h−1. This maximum uptake rate was chosen, since it closely matched the maximum uptake rate of oxygen observed in vivo (e.g., see Edwards et al, 2001; Fischer et al, 2004). All other modeling parameters were set to those determined in the application of iAF1260 to predict cellular phenotypes section. The BOFCORE was used in all simulations (except those stated otherwise), since the predicted GR and OUR were found to be insensitive to the use of either the BOFCORE or BOFWT.
Alternate growth condition analysis
To determine the carbon, nitrogen, phosphorus and sulfur sources that could support simulated growth, we screened all of the metabolites that could be exchanged with the environment (i.e., exchange reactions) in the iAF1260 and iJR904 models. The identified metabolites formed the potential substrate sets (Table IV). Through subsequent simulations, we set an arbitrary maximum flux of 20 mmol substrate gDW−1 h−1 for each potential substrate tested (consistent with maximum observed substrate uptake rates in vivo) and optimized for flux through the BOFCORE using FBA and either iAF1260 or iJR904. An OUR of 18.5 mmol gDW−1 h−1, the BOFCORE, a NGAM of 8.39 mmol ATP gDW−1 h−1, a GAM of 59.81 mmol ATP gDW−1 and no regulatory constrains were used during the growth condition analysis of iAF1260 (for iJR904, see Reed et al, 2003). During the analysis, the reactions CAT, SPODM and SPODMpp were constrained to zero to prevent generation of cellular energy equivalents through reactions involved in E. coli's response to oxidative stress. If a positive flux could be generated through the BOFCORE reaction (vBOFcore>0), then the substrate was considered a viable source. Experimental data used in the comparison were provided by Biolog (http://www.biolog.com) and both ‘weak’ and ‘positive’ readings from the biolog data were considered as a positive growth condition.
Gene essentiality analysis
To determine the effect of a gene deletion, the reaction(s) associated with each gene in iAF1260 were individually deleted from S and FBA was used to predict the mutation growth phenotype. The simulations were performed using glucose minimal medium conditions with a GUR of 10 mmol gDW−1 h−1, an OUR of 20 mmol gDW−1 h−1, the BOFCORE, an NGAM of 8.39 mmol ATP gDW−1 h−1, a GAM of 59.81 mmol ATP gDW−1 and zero flux through the 152 reactions regulated under glucose aerobic conditions (see Supplementary information). The flux through the BOFCORE was optimized in the mutated network, S′, and a positive flux through the BOF (vBOFcore>0) was considered non‐essential (equation 2). Experimental criteria for gene essentiality are described in detail in Joyce et al (2006).
Standard conditions for all estimated ΔrG′o and ΔfG′o
All ΔfGest′o and ΔrGest′o calculated for the reconstruction using the group contribution method are based upon the standard condition of aqueous solution with pH equal to 7, temperature equal to 298.15 K, zero ionic strength and 1 M concentrations of all species except H+, and water. In the cases where multiple charged forms of a molecule exist at pH 7 (i.e., ATP4− and HATP3−), the most abundant form is used. This is consistent with the form of the molecules used in the fitting of the group contribution energy values (MD Jankowski and V Hatzimanikatis, in preparation).
The charges of the molecules and the proton balances for the reactions included in the reconstruction are based on a reference pH of 7.2. In order for the ΔrGest′o values included with the reconstruction to match the reference pH of the reconstruction, all ΔrGest′o calculated using the group contribution method (based on a reference pH of 7) were adjusted to a reference pH of 7.2 using the method described in Alberty (2003). The adjusted ΔrGest′o values were used in the calculation of ΔfG′m and for all other thermodynamic analysis performed on the reconstruction. The pKa values for the compounds in the reconstruction used in the transformation of ΔrGest′o to a reference pH of 7.2 were estimated from the molecular structures of the compounds using the MarvinBeans software developed by ChemAxon.
Adjustment of ΔrG′o to ΔfG′m
The ΔrG′m calculated for all reactions contained in the reconstruction is based on the reference state of 1 mM concentrations for all species except H+, water, H2 and O2. The reference concentrations for H2 and O2 are the saturation concentrations for these species in water at 1 atm and 298.15 K. All ΔrG′m values reported in this work also include the energy contribution of the transmembrane electrochemical potential and proton gradient for all reactions involving transport across the cytoplasmic membrane assuming a periplasmic pH of 7.7 and a cytoplasmic pH of 7.2. All ΔrG′m calculated for reactions in the iAF1260 model are listed in Supplementary information.
We also determined the direction of flux required in the reactions contained in iAF1260 to achieve near optimal growth (90–100%) on each of 174 carbon sources using FVA (Mahadevan and Schilling, 2003) and the BOFCORE. It is worthwhile to note that the same set of reactions can or cannot be utilized in FVA simulations when examining approximately 5–95% of the optimal flux value achievable for the BOFCORE under glucose aerobic conditions (one exception is the cytochrome oxidase bo and oxygen transport reactions, which are needed for generating the necessary energy to achieve approximately 80% or greater of the BOFCORE flux). During the FVA of conditions corresponding to glucose aerobic growth, the reactions CAT, SPODM and SPODMpp were constrained to zero to prevent generation of cellular energy equivalents through reactions involved in E. coli's response to oxidative stress, and the reaction formate hydrogenlyase, which appears to be involved in regulating cytosolic pH (Mnatsakanyan et al, 2004), was also constrained to zero to prevent the production of significant amounts of hydrogen gas that is not typically observed for most buffered experiments around pH 7. The results of the FVA indicated that some of the reactions in the reconstruction consistently operated in the reverse direction. During the calculation of ΔrG′m for these reactions, the forward direction of each reaction was redefined to be in the direction of flux required for near optimal growth to occur. Because of this adjustment, all negative ΔrG′m and ΔrG′ values reported (see Figure 2) indicate reactions that are thermodynamically feasible in the direction of flux while positive values indicate thermodynamically infeasible reactions.
Estimation of achievable range of values for ΔrG′
The range of possible values for the ΔrG′ of a reaction depends not only on ΔrG′o but also on the uncertainty in the estimated ΔrG′o (Ur,est), the activities of the metabolites involved in the reaction and for transport reactions, the energy contribution of the electrochemical potential and proton gradient across the cytoplasmic membrane (ΔGTransport) (Henry et al, 2006). ΔrG′ can deviate from ΔrG′m because the activity of a metabolite can deviate from the reference value of 1 mM. The maximum and minimum values for ΔrG′ were calculated using the following equations.
where xmin is the minimal metabolite activity assumed to be 0.00001 M, and xmax is the maximum metabolite activity assumed to be 0.02 M. The physiological range of activities for the dissolved gasses H2, O2 and CO2 is much lower than the range of activities for other metabolites involved in metabolism. For this reason all of the xmin values for H2, O2 and CO2 were set to 10−8 M, which is approximately equivalent to one molecule per cell, and the xmax values for H2, O2 and CO2 were set to the saturation concentrations for these gasses in water at 298.15 K and 1 atm, 0.000034, 0.000055 and 0.0014 M, respectively. The activity terms for H+ and H2O were left out of equations 4 and 5 because these activities have already been lumped into the ΔrG′o.
The ΔrG′ ranges encompassed by ΔrGmin′o and ΔrGmax′o calculated for the reactions in the reconstruction were used to assign reversibility and directionality to the reactions based on the thermodynamic estimates. Reactions with exclusively negative ΔrG′ values were identified as thermodynamically irreversible in the forward direction, reactions with exclusively positive ΔrG′ values were identified as thermodynamically irreversible in the reverse direction and reactions with both positive and negative ΔrG′ values were identified as thermodynamically reversible. FVA was then utilized to determine the directions in which each of the reactions in the reconstruction operated during near optimal growth on 174 carbon sources. In this way, reactions for which the direction of operation indicated by FVA conflicted with the direction of thermodynamic feasibility indicated by the ΔrG′ ranges were identified.
We thank Kenyon Applebee, Edward Chuong, Ingrid Keseler, Sean Nihalani, Alan Ruttenberg, Milton Saier, Jan Schellenberger and Jeremy Zucker for their help in the generation and analysis of the reconstruction. Studies performed at UCSD were supported by National Institutes of Health Grant GM057089. Bernhard Palsson and UCSD have a financial interest in Genomatica Inc. Although the NIH R01 GM057089 grant has been identified for conflict of interest management based on the overall scope of the project and its potential to benefit Genomatica Inc., the research findings included in this publication do not necessarily directly relate to the interests of Genomatica Inc.
Legend to Supplementary Material [msb4100155-sup-0001.pdf]
Supplementary Text, Figures and Tables [msb4100155-sup-0002.pdf]
Supplementary Information 1 [msb4100155-sup-0003.xls]
Supplementary Information 2 [msb4100155-sup-0004.xls]
Supplementary Information 3 [msb4100155-sup-0005.xls]
Supplementary Information 4 [msb4100155-sup-0006.zip]
Supplementary Information 5 [msb4100155-sup-0007.zip]
Supplementary Information 6 [msb4100155-sup-0008.zip]
This is an open access article under the terms of the Creative Commons Attribution‐NonCommercial‐NoDerivs License, which permits use and distribution in any medium, provided the original work is properly cited, the use is non‐commercial and no modifications or adaptations are made.
- Copyright © 2007 EMBO and Nature Publishing Group